Skip to main content

TCC 1800-UEA

Test Controller Card with extensive I/O and high flexibilty

    Details

    • TCC 1800-UEA-L: Type L (Low Bezel) for use with TEST-OK 4000 BPL-UEA, TEST-OK 4000 B-BPL or TEST-OK desktop enclosure
    • TCC 1800-UEA-H: Type H (High Bezel) for use with TEST-OK 4000 AQ-UEA or TEST-OK 4000 B-UEA

    Description

    The TCC 1800-UEA Test Controller Card is an advanced test controller card for production testing of printed circuit boards. The TCC1800-UEA is controlled by a proprietary test language. The board is connected to a PC via an Ethernet or isolated USB connection. The TCC 1800-UEA can be used with all TEST-OK single side, dual side and 19" solutions.

    The TCC1800-UEA is designed to work with positive voltages up to 24V and differential voltages up to 60V. The card provides extensive IO: Analog and Digital interfacing, Counters and Frequency measurement, PWM outputs, bidirectional I/O, UART/485, Ethernet-, CAN, Isolated USB 2.0 HS, SPI and I2C interfacing.

    Compared with the TCC 1800-UE-2 card, the TCC 1800-UEA has 16 differential high resolution isolated AD converters ( 4 groups of 4 chanels), which could be configured as 28 single ended chanels. Each chanel can be configuered as high precision mode (read out resoltution 1uV).
    The USB chanel available on the module accepts up to 5 USB hubs. Digital inputs can be configured on ON level and also OFF level (each group). Ethernet provides a speed up to 1 Gbit/s. The outputs for ethernet can also be configured as digital outputs. SPI, UART, 485 and I2C can be configured from 1.8 up to 5V. Fixed power supplies are monitored.

    Connecting the TCC 1800-UEA

    It is possible to connect to the TCC1800-UEA via the USB port as an alternative to the connection over the Ethernet port. If needed the Ethernet port must remain connected to provide Ethernet communication to the module. A USB-over-Ethernet add-on board is available to enable USB connectivity over the Ethernet interface.

    Both TCC 1800-UEA and TCC 1800-UE-2 cards have the same connection interface to the PC.
    There are two ways to connect to the PC: via USB or Ethernet.

    Ethernet offers the advantage that, within a local area network, the test controller card can be controlled from any PC on that network segment.
    If the USB-over-Ethernet functionality is used, the USB device connected to the TCC card will also appear on the connected PC.

    If this is not desired, it is possible to connect the TCC card via the galvanically isolated USB bus.
    In this case, the Ethernet interface only functions as a provider of Ethernet connectivity to the UUT.

    Another option is to maintain the flexibility of the network connection while connecting the USB network of the test system directly to the PC through the USB port.

    To enhance the test system, various built-in options are available: A dual-output 24 VAC power supply and a configurable switch mode AC/DC power supply module providing voltages up to 0 ...50 VDC and 0 ...35 VAC.
    For more complex USB configurations on the Bottom or Top Module, an integrated hub is available, offering up to ten USB ports (five ports for the Bottom Module and five ports for the Top Module).

    USB options on TCC 1800-UEA

    As the demand for additional USB devices increases—not only on the bottom side of the UUT, but also on the top side—TEST-OK now introduces a fully integrated USB hub for both the bottom and top modules.

    In practice, up to five devices can be connected on each side of the UUT, such as flash programmers, USB converters, cameras, and more.
    For these devices, only the PCB layout towards the needed USB connectors is required—an external hub with casing and cabling is therefore unnecessary.

    The USB connections also comply with the USB 2.0 High Speed (480 Mbit/s) specification. In TEST-TRACK, all connected USB devices are displayed in a tree view upon connection. 

    All USB ports support USB 2.0 High Speed (480 Mbit/s). On Bottom and Top module each hub provides in 2 Ampere in total for connected USB devices.

    Specifications

    2 Programmable Power Supplies
    Power Supply 1 and 2
    1.2 - 24 VDC
    Current measurement
    Resolution 1 mA
    0 - 3 A
    2 Fixed Power Supplies
    5 V, 0.5 A / 28 V, 0.75 A
    Isolated Differential Analog Inputs
    16 Differential
    130 V (p-p), 1 uV resolution
    Isolated Differential Analog Inputs
    28 Single ended (isolated)
    60 V, 5 mV resolution
    16 Analog Outputs
    0 - 24 V, 5.9 mV resolution
    24 Digital Inputs with Schmitt Trigger
    1 frequency measurement/pulse counter
    0 - 24 V
    24 Digital Inputs with Schmitt Trigger
    4 pulse width/pulse counters
    0 - 24 V
    52 Digital Outputs (20 bi-directional)
    3 groups of 8 bits with programmable logic '1' level
    1.5 - 24 V
    4 'High-Side' power outputs with programmable output voltage
    5.5 - 24 V
    4 'High-Side' power outputs with programmable output voltage
    24 open collector outputs, capable of driving relays
    24 open collector outputs, capable of driving relays
    2 PWM Outputs
    5 V, 0 - 1 MHz, 0 - 100% Duty Cycle
    I2C Interface
    SPI extension interface
    Additional in- and outputs
    1 Serial Channel
    UART/485
    5 V
    SPI interface
    78 kHz
    CAN
    2-wire, 1-wire
    Ethernet Ports
    LAN 1 and 2 (Bezel)
    10/100/1000 Base-T Ethernet
    Ethernet Ports
    TEST-OK Module
    10/100/1000 Mbits/s
    Ethernet Ports
    Expansion Board
    10/100 Mbits/s
    6 USB Ports over Ethernet or Direct
    Module, Expansion Board, 4 Backside
    USB 2.0 HS (Hub supported)

    Options and ordering

    Article
    Info
    Order code
    TCC 1800-UEA
    With high or low bezel
    TOA020959
    Services
    TCC 1800-UEA Error Analysis and Report of Testparameters
    Including Report of Testparameters
    TOA010127

    Related products